Jetson Solar Technologies

• Commonly available power levels- 1.1 KW, 2.2 KW, 3.3 KW, 4 KW, 5 KW
• Any customization can be done as per power level.
• Single Phase Inverter is designed with 1200V SiC power Field Effect Transistors (FETs) rather than the 600V Si IGBTs (almost all other commercially available inverters are based on 600V Si IGBTs).
• With the use of 1200V SiC Power FETs, the maximum PV voltage for our inverters is 1000V as opposed to 500V for almost all other commercially available inverters.
• Single PV channel is enough for power levels up to 5KW:
  • With PV string voltage up to 1000V, dual MPPT is not required.
  • Lower inverter cost, less PV wiring, and lower system cost.
• Minimal component count leads to maximum reliability.
• Zero residual current transformerless technology has been used: Inverters are compatible with thin-film PV modules (that have higher parasitic PV capacitance) as well, provided the positive or negative terminal is not grounded.
• Pyramid Inverters have been completely researched, designed, and developed in-house. Further 100% of production from scratch is in-house and thus the inverters are “MADE IN INDIA” in their true sense.
• Any sort of customization can be done to the inverters:
  • Customized Power level
  • Customized number of MPPT Trackers/String configuration
  • Customized zero export control
• One of the first commercially available Grid Tied Solar Inverter based on Silicon Carbide (SiC) Power devices technology.
• With SiC Power devices technology, our inverters have unmatchable power conversion efficiency and power density (minimum volume for a given power level)
• For remote monitoring, both WiFi and GSM have been integrated into all our inverters.
• Excellent customer support:
  • We have around 60 service centers spread across India
  • Greater than 95% uptime guaranteed for inverters installed within India and inverter replacement with three days of failure
  • Standard warranty of10 years.
  • Automatic and free of cost remote monitoring: All our inverters are connected to a central server that monitors all the inverters round the clock for any failures. In case of failure, the customer and PV installer will be informed via mail/mobile and the inverter is replaced within three days of failure detection.
• A mobile app/web app for remote monitoring of Inverters is available (both Android and iOS versions available).

• Top high quality AL profile to reduce & maintain temperature.
• All-whether proof …IP 65, All IEC Standards for Safety.
• Fan less technology, natural convection & engineering profile heat sink design.
• Super capacitor for longer life with Watchdog circuitry for Redundancy.
• Inbuilt ELC and SPD Protection in AC / DC power side.
• Full Graphic Mimic LCD with Backlight.
• Infineon make IGBT with 20% more power rating than others with High Switching Frequency. 

  Model	KSY10KW
  Max. DC Power (KW)	12
  Max. DC Voltage (Vdc)	1000V DC
  Max. MPPT I/P Current(A)	20 A
  MPPT Short Circuit Current(A)	26 Amps.
  MPPT Tracking Voltage(Vdc)	200-1000V
  Min. Start/Shut down (V)	250VDC/150VDC(Low) & 1000VDC(High)
  Number of MPPT Tracker	1/2
  strings per MPPT Trackers	2

  Output (AC)

  Nominal Output Power(KW)	10
  Max. Output Power(KW)	11
  Nominal Grid Voltage(V)/Range(V)	320-470V User Defined
  Nominal Grid Freq/Range(Hz)	47-55 HZ Auto Selected
  Max. Output Current (A)	15
  AC Connection( with PE)	3P + N + E
  THD(%)	<2.3%
  Power Factor(%)	>99.99% (User Defined from 0.85 to 0.99)

  Efficiency

  Max. Efficiency (%)	98.8
  Max. Euro Efficiency (%)	98.3
  Max. MPPT efficiency (%)

  Standards, Safety & Protections

  Safety	DC Reverse Polarity, DC High / Low /Over Current Protection, DC / AC Side SPD, Thermal Protection, GDT, Static ELCB / RCCB, User Defined Grid Monitoring Setting & Anti Islanding
  SPD	TYPE-3 SPD
  MPPT Efficiency	EN50530
  Inverter Efficiency	IEC61685
  Protection Class	1(According to IEC -62103)
  Over Voltage Category	PVII/MAINS II(According to IEC -62109-1 )
  Safety Standard	IEC 62109-1&2
  EMC Standard	IEC 61000-6-1/2/3/4
  Emnvironment Protection	IEC 60068-2-1/2/14/15
  Product Safety for Relay	IEC 60255-27:2013
  Anti-Islanding	IEC-62116
  Ingress Protection	IP 65 (Accordance to IEC 60529)

  Physical Parameters

  Dimensions (WxHxD) mm	385*490*180
  Weight(kg)	26

  General Data

  Operating Temperature	MINUS 25 TO PLUS 60 DEGREE
  Night Con. (W)/Noise Level	<0.2/<25dB
  Design Life	OVER 25 YEARS
  Heat Dissipation	Natural Convection
  RH/Max. Altitude	0% to 98%. No Condensation / <2000 without power derating
  Display	LED with LCD Display
  DC /AC Connectors	MC-4/IP 65 PLUG
  Communication Interface	RS 485/RS 232/HOTSPOT/WIFI/GPRS/ETHERNET LAN
  Standard Warranty	5 YEARS/10 YEARS (For Selected Model)

Product Name - K Solare 3 KW Single Phase On Grid Solar Inverter, Optional DC Switch, 500V, 1 MPPT
Model - 3 KW,
Max Peak DC Input Power – 3.3 KW,
Max DC I/P – 500V DC,
Max MPPT I/P Current(A) – 12.5A,
MPPT Short Circuit Current(A) – 18A,
Minimum Start Voltage – 100/120V,
Rated Output Power(KW) – 3,
Rated Grid Voltage – 230V,
Nominal Grid Freq (Hz) – 50HZ,
Max. Output Current AC (A) – 13,
Max. Conversion Efficiency – 97%,
Dimensions (LXHXW) – 310X330X115mm,
Weight – 6KG,
Operating Temperature – Minus 25 Degree to Positive 60 Degree Celsius
Warranty - 8 Years
Battery - Not Included